We work throughout the territory of Ukraine
This is an innovative, two-component light and strong polymer mounting compound based on fast-hardening resin. It is used for installing wooden, plastic and metal support structures of various shapes and cross-section profiles in the ground.
(about 10 cm) allows to reduce labor costs.
1 package = 1 structural element. Small weight - easy and convenient transportation.
Fast preparation time of the working mixture - 20 seconds
No additional working tools are required.
Electricity and water are not required
There is no need to clean and dry your clothes afterwards works
Accuracy and aesthetics. The lawn completely hides traces installation
installation within a few minutes
one package replaces several bags of cement mixture
stronger than the soil in which is used
Protects metal from corrosion, and wood from rotting. Does not absorb water and excludes capillary penetration.
Resistance to dynamic loads. Does not crack with significant temperature fluctuations.
Possibility of repeated use of structures without aesthetic losses
|*||60 см||90 см||60 см||90 см|
|**||10 см||15 см||10 см||15 см||20 см||25 см||15 см||20 см|
The size of the structure
|10 x 10 см||-||1,0||-||0,5||1,5||2,0||1,0||2,0|
|9 x 9 см||-||1,5||-||0,5||1,5||2,0||1,0||2,0|
|7 x 7 см||0,5||2,0||1,0||1,0||1,5||2,5||1,5||2,5|
|5 x 5 см||1,0||2,0||1,5||1,0||1,5||2,5||1,5||2,5|
|6 x 4 см||1,0||2,0||1,5||1,0||1,5||2,5||1,5||2,5|
|Ø 5 см||1,0||2,5||1,5||1,0||1,5||2,5||1,5||2,5|
|Ø 6 см||1,0||2,0||1,5||1,0||1,5||2,5||1,5||2,5|
* - Depth of the hole (at least 40 cm)
** - Hole diameter
QUIKSET is a chemical product, and its chemical reaction depends on the temperature conditions of the environment. This has a direct effect on the speed and volume of expansion of the mounting mass.
Gazebos and verandas
Swings and simulators
Canopies and shelters
Gates and wickets
Terraces and pergolas
Masts and masts
a hole of a given diameter and required depth (see the table on the product label or in the booklet)
Align and fix the structure in the desired position; wear protective gloves
REMOVE THE SEPARATION CLAMP
With a vigorous movement, pull both ends of the bag in opposite directions
MIX (20 seconds)
both components, energetically redistributing the content inside packages (but no more than 30 seconds)
OPEN THE PACKAGE
in the designated place.
POUR IT IN
content of the bag in the hole, distributing evenly around construction element.
WAIT (3 minutes)
before the end of the process of expansion of the mounting mass and the beginning of it curing
REMOVE SURPLUS (after 10 minutes)
if necessary, cut with a shovel, knife, etc.
the place of installation, covered with soil to protect against splashes direct sunlight.
can be applied after final curing (after 4–5 hours).